If I’m going to get my wish list to Santa before Christmas, I’d better send it now. This year has been a tough one for a few reasons, but mostly because my mom died in the fall. That threw everything off, including my blog writing. I just didn’t have the appetite to write, or ride, or do any of my other interests. But the midwinter holiday and the turn of the new year is as good an opportunity as any to turn the corner and start to look forward to the warmer weather and the chance to ride again. Here are a few things I’d like to get for the 2019 season.
But first, let’s take a look at what didn’t make it off my wish list last year.
- Upper crash bars: check
- Inline fuel filter: check
- Flexible front flashers: check
- Chain-breaker: check
- Wheel lug/tire iron wrench: check
- New front tire: check
- Body armour: check (not Leat but Knox)
So the only two items that didn’t make it off my 2018 wish list were the Garmin Montana GPS, for the second year running, and the Sea-to-Summit mattress.
Garmin Montana 650
The GPS is a must this year; I can’t put it off anymore. As you know if you read my last post, I actually suffered a breakdown on my tour this summer from using a phone GPS. The port on the phone is just not built to withstand the demands of off-road riding—the vibrations, the moisture, the drain on the battery. I ended up jeopardizing my bike’s battery which led to the breakdown. And if you’re doing any serious off-roading, you’re often going to be outside of cell service. This is a fairly big-ticket item so I’ve been avoiding it, but fortunately, I’ve been doing some writing for Ontario Tourism and the money earned from that writing will offset the cost this year.
There is a new 680, but the 650 will be more than enough for my purposes and maybe I’ll get a deal on a discontinued model. I’m so tired of trying to use GoogleMaps to plan my rides! It works okay to get you there but you don’t have much choice in the route (just “avoid motorways,” “avoid toll roads,” and “avoid ferries.”) I’m looking forward to being able to use BaseCamp to plan rides on my computer and import tracks to the GPS. It’s also going to open up a whole new world of off-road track sharing through forums. The Montana is the most popular off-road GPS on the market, with topographical maps, the ability to geocache photos, dual map capability, a micro SD card slot, and many more features that I’ll probably never use. Best of all, it’s rugged.
A Lithium Battery
I’ve also decided it’s time to retire my old wet cell battery. I actually got two when I bought the bike. One died about a year ago, and the second is now getting weak. The battery on my bike is known to lose fluid because it’s right next to the upper oil tank, so it gets hot. Also, you have to remove all the plastics on the bike to check and to maintain the battery, so a low maintenance battery would be a huge benefit. I’ve decided to try a lithium battery. I heard about them on Adventure Rider Radio but had concerns about using a lithium battery in a cold climate like Canada’s. However, I’ve heard on forums that it shouldn’t be a problem. You just turn the electrics on for a minute or two to let the battery warm up before hitting the starter. I won’t have to worry about this one boiling dry, as my current one did outside of Mattawa, and an added huge benefit is that it’s much lighter than a wet battery. It’s the easiest way to shed several pounds up high on my bike.
Ricor Intiminator Fork Valves
This past year, I lost the preload adjuster on the rear shock. I think what happened was the new Holan upper crash bars install too close to the adjuster. The bars use the same mounting point, and I think the adjuster threads got strained from the tip-overs and eventually stripped. I was lucky to find a generous soul willing to swap me his adjuster for mine, but in doing some research on this item, I discovered that many riders find the suspension on my f650GS too soft, especially for off-roading. I’m not a big guy, so I don’t find the rear too soft, but the front end does dive under braking, and for the past while I’ve had a clunking noise coming from the forks on certain types of bumps. I was going to rebuild the forks this summer, replacing the bushings, so I’ve decided to install some Ricor Intiminators at the same time to firm up the front end. They don’t look like much, but these babies have something called Inertia Active Technology. Developed over a twenty year span, this technology can distinguish between chassis motion (fork dive) and wheel motion (bumps in the road). It allows the wheel to move and stay in contact with the road but doesn’t allow the forks to compress when front brake is applied. How, you ask? You’ll have to read the details of the technology at their site. The bottom line is that you get a cushy ride on the road without the fork dive under braking, and better handling off road. According to many comments on user forums, the suspension on my bike is its greatest weakness, so I’m looking forward to improving the front end.
K & N Air Filter
This one is kind of a no-brainer, which makes me wonder what took me so long to make the switch from paper to cloth air filters. Okay, I do remember reading up on foam filters when I first got the bike, but what I read was that the OEM paper filter protects better than foam. And that is true, partially. Dry foam filters have holes upwards of 90 microns in size, too big to stop sand, which can penetrate your engine and do nasty stuff to it. But an oiled foam filter will protect your engine just fine, and most dirt bikes and off-road bikes like KTMs use oiled foam filters. However, too much oil results in loss of power because not enough air is getting in to mix with the fuel. Recently I discovered the K & N cloth filter which protects as well as OEM but is reusable like foam. It’s also zero maintenance (no oil to administer) and is reusable; just clean in soapy water, rinse, and dry each year. Sounds like the best option for me. Goodbye disposable paper filters.
Klim Carlsbad Pants
Santa came a little early this year with some Klim Carlsbad pants for me, so this one is not officially on my wish list. I love my Klim Dakar pants; nothing is more flexible and durable for off-road riding than the Dakars. But they are not waterproof. That’s just not the way they are designed. They are designed to pull through overhanging thorny brush without tearing, and to allow maximum airflow when it’s not, so not waterproof and not for adventure touring. I’ve been desiring a Gore-Tex pant that will keep me cool in the heat and dry in the storms. No stopping under bridges to pull on rain gear, no trying to anticipate weather—just ride rain or shine and remove guessing from your day. I saw these on sale 43% off their regular price about a month ago and jumped before Fort Nine sold out of my size.
Steel-Braided Brake Lines
Last year I accidentally damaged my rear brake line while fixing my rear shock. I’ve decided I might as well take the opportunity to upgrade to steel lines which are better for off-roading anyway. Galfer lines are made in the USA, are model specific, and have teflon inner coating to avoid deterioration. There are even colour options for both the line and mounting hardware. I’ve already got new front and rear disc pads waiting to be installed, so I’ll be doing a complete brake rebuild in the spring.
That’s it. A suspension upgrade, a lithium battery, and (finally!) a motorcycle GPS top my wish list for this year. But like last year and every year, my main wish is continued health. A friend of mine is currently battling brain cancer and wasn’t able to ride last year. He’s recently had a setback and will be spending Christmas in the hospital. I’m thinking of him a lot and would gladly forego all these goodies and more for his health, but unfortunately there are no deals like that available in life. You have to count your blessings, and bless each day you have to live. However messed up this world is, experiencing all it has to offer is and always will be the most wonderful gift of all.
Merry Christmas and happy holidays to you and yours.